| |
|
All of UB's uppers come black powder
coated
to resist corrosion and are built
with a
medium alloy tube. There is no
seamwelded tubing in our arms. |
16-A SERIES
High misalignment monoball upper control arm
6" center-to-center on crosshaft available in
aluminum or steel
NOTE: Stud and bearing are not included
16-XXX0-A (ALUMINUM) $53.25
16-XXX4-A (STEEL) $55.90 |
| |
| 16-XXXX-A SERIES WITH 5/8" MONOBALL PART NUMBERS |
| LENGTH |
ALUMINUM SHAFT $53.25
|
STEEL SHAFT $55.90 |
| 6-1/2" |
16-0620-A |
16-0624-A |
| 6-3/4" |
16-0630-A |
16-0634-A |
| 7" |
16-0700-A |
16-0704-A |
| 7-1/4" |
16-0710-A |
16-0714-A |
| 7-1/2" |
16-0720-A |
16-0724-A |
| 7-3/4" |
16-0730-A |
16-0734-A |
| 8" |
16-0800-A |
16-0804-A |
| 8-1/4" |
16-0810-A |
16-0814-A |
| 8-1/2" |
16-0820-A |
16-0824-A |
| 8-3/4" |
16-0830-A |
16-0834-A |
| 9" |
16-0900-A |
16-0904-A |
| 9-1/4" |
16-0910-A |
16-0914-A |
| 9-1/2" |
16-0920-A |
16-0924-A |
| 9-3/4" |
16-0930-A |
16-0934-A |
| 10" |
16-1000-A |
16-1004-A |
| 10-1/4" |
16-1010-A |
16-1014-A |
| 10-1/2" |
16-1020-A |
16-1024-A |
| 10-3/4" |
16-1030-A |
16-1034-A |
| 11" |
16-1100-A |
16-1104-A |
| NOTE: ALL UB MACHINE UPPER CONTROL ARMS ARE MEASURED
FROM THE CENTER OF THE INNER SHAFT TO THE CENTER OF THE BALL JOINT. |
If you need a control arm that is not listed, please contact us for price and availability. We manufacture special order A-arms to your specifications.
(Special set-up charge will apply.) |
|
| |
|
| 16-A SERIES UPPER CONTROL ARM PARTS |
| 40-4185-A |
Ball joint stud adapter |
$18.30 |
| 47-1085 |
5/8" monoball high misalignment |
$27.50 |
| 48-5137 |
Snap ring |
$0.80 |
|
|
| |
|
All of UB's uppers come black powder
coated
to resist corrosion and are built
with a
medium alloy tube. There is no
seamwelded tubing in our arms. |
16-XXXX-A
Monoball upper, 9-1/2" long, 5/8" monoball
Slotted shaft in aluminum or steel
Allows you to use caster slugs to set multi-caster settings using the same control arm
(Slugs sold separately)
16-XXX1-A (ALUMINUM) $61.30
16-XXX3-A (STEEL) $63.45 |
| |
|
16-XXX1-A and 16-XXX3-A SLOTTED PART NUMBERS
(ANY LENGTH AVAILABLE)
|
| LENGTH |
ALUMINUM SHAFT $61.30 |
STEEL SHAFT $63.45 |
| 6-1/2" |
16-0621-A |
16-0623-A |
| 7" |
16-0701-A |
16-0703-A |
| 7-1/4" |
16-0711-A |
16-0713-A |
| 7-1/2" |
16-0721-A |
16-0723-A |
| 7-3/4" |
16-0731-A |
16-0733-A |
| 8" |
16-0801-A |
16-0803-A |
| 8-1/4" |
16-0811-A |
16-0813-A |
| 8-1/2" |
16-0821-A |
16-0823-A |
| 8-3/4" |
16-0831-A |
16-0833-A |
| 9" |
16-0901-A |
16-0903-A |
| 9-1/4" |
16-0911-A |
16-0913-A |
| 9-1/2" |
16-0921-A |
16-0923-A |
| 9-3/4" |
16-0931-A |
16-0933-A |
| 10" |
16-1001-A |
16-1003-A |
| 10-1/4" |
16-1011-A |
16-1013-A |
| 10-1/2" |
16-1021-A |
16-1023-A |
| 10-3/4" |
16-1031-A |
16-1033-A |
| 11" |
16-1101-A |
16-1103-A |
| NOTE: ALL UB MACHINE UPPER CONTROL ARMS ARE MEASURED
FROM THE CENTER OF THE INNER SHAFT TO THE CENTER OF THE BALL JOINT. |
If you need a control arm that is not listed, please contact us for price and availability. We manufacture special order A-arms to your specifications.
(Special set-up charge will apply.) |
|
